Parts remaining for 2009 EDGE 540T 25e 3D
The past few months, our EDGE 540T 25e-3D prototype became THE model which was always taken to the field when Air Craft tech staff went out to play. Now you can get one, too!
The standard power set for Hyperion 25e class Aerobatic F3A and 3D models comes with Z3019-12 motor, for tremendous "all-round" performance on 3S packs (VZ2000, VX2200, VX2500) using a 12x6 APC E prop. For pilots who want 3D ability, but primarily "big sky" aerobatics, we suggest 3S 3200~3300mAh packs. This gives you longer run time, better wind
penetration and stability, and more energy carried into and through big manuvers.
An alternative power set is available in the lower-Kv Z3019-14 motor, which
allows a "max 3D" setup using 13x6.5 prop on 3S, or extreme performance on
11x5.5 to 12x6 props on 4S packs.
Power sets include the motor, Hyperion 50A BEC ESC, prop adapter, and
connectors. When you buy model and power set togther, you get a 10 percent discount(or more) on both the model, and the componenets in the power set
詳細はデータシートをご覧ください
|
